Showing posts with label Enameled Copper Wire sale. Show all posts
Showing posts with label Enameled Copper Wire sale. Show all posts

2015/09/29

How to Insulate Copper Wire

Insulating your electrical copper wiring will protect your wire from the elements, and, most importantly, will protect the wiring from catching fire. Most electrical wire y is insulated, but you should avoid using uninsulated wiring because there is a risk of fire and electrical shorts. Insulate your wire as a last resort. You should try to replace it with insulated wire, preferably nonmetallic sheathed cables.

Instructions

1, Install PVC conduit at the location where you want to use your uninsulated wire and glue with fittings and PVC solvent cement. Use the brush that comes with the PVC solvent cement to spread a thin layer and hold the conduits together for 30 seconds until the solvent dries. You must run a separate PVC conduit for each cable if they are uninsulated.

2, Connect conduits to a plastic electrical box. Push the conduit into the hole of the electrical box and secure in place with electrical conduit box connector by snapping the connector on. Do not use a metal box if your cable is uninsulated.



3, Wrap end of cable on wire puller, so it forms a knot at the tip of the wire puller. Wrap the tip of the wire puller with electrical tape to secure the wire to the wire puller. Leave the cable unrolled so you can push it easier through the conduits.

4. Pull cable through electrical conduit with the wire puller. Use wire lubricant if it gets stuck. Squirt the entrance of the electrical conduit until its covered with lubricant and the tip of the wire puller with wire lubricant to ease it through the conduit.

5. Connect cable to intended receptacle in the plastic electrical box.

6. Wrap all exposed wires in the electrical box with electrical tape. This will prevent the wires from touching and shorting.

2015/09/06

Polyester Enameled Copper Wire

Polyester Enameled Copper Wire

Composition: copper conductor and polyester resin

Features: good mechanical strength, film adhesion, excellent electrical, scratch resistance, chemical resistance, thermal stability and solvent resistance;

Uses: Electronic Communications lighting coil, sealed submersible motors, micro-generators, heat transformers, contactors, solenoid valves.


2015/08/31

ClassF Enameled Copper Wire

Ordinary polyester enameled copper wire temperature level is 130. However, the modified polyester enameled copper wire’s temperature level can be reached 155. 

The product has high mechanical strength , good flexibility, adhesion, electrical properties and solvent resistance. But class f enameled copper wire has poor thermal shock resistance and low moisture resistance properties.



Class f enameled wire is the largest kind of China's current production capacity, accounting for about two thirds. Class f enameled copperwire can be used widely in a variety of electrical, electronics, instrumentation, telecommunications equipment and household electrical appliances.


2015/08/27

Polyester and modified polyester enameled wire

Polyester and modified polyester enameled wire

Ordinary polyester enameled heat level of 130,
After the modified enameled heat level is 155.

Polyester and modified polyester enameled wire have high mechanical strength, and has good flexibility, adhesion, electrical properties and solvent resistance. But thermal shock resistance weakness is poor, and have low moisture resistance properties.

It is China's current production capacity of the largest species, accounting for about two thirds of the wide range of applications on a variety of electrical, electronics, instrumentation, telecommunications equipment and household electrical appliances.


2014/09/23

Q&A About Enameled Copper Wire

Q&A About Enameled Copper Wire


Q: What is Enameled copper wire?

A: Enameled copper wire is copper wire coated by a insulating paint usually colored red. 

Q: What is enameled copper wire?

A: yes, it's copper wire with a coating of enamel to insulate it. It's intended to be used in coils and transformers where the wire is wound with the turns in physical contact with each other. the 

enamel prevents the turns from shorting to each other. 

Q: The Properties of Enameled Copper Wire.

A: One of the primary properties that makes enameled copper wire desirable for these applications is the enameling insulation. Transformers, motors and generators .

Q: Enameled copper wire value?

A: Which of. Monetary value. Resistance. Density. Etc etc. 

Q: The UL Classification of Enameled Copper Wire.

A: Enameled copper wire is a type of magnet wire. This means it is used as the wire in electromagnets, which are magnets that use electricity to generate a magnetic field. The wire is wrapped in 

a tight coil. When an electric charge is applied, the wires generate the magnetic field. This type of wire has a wide variety of applications, including use in automobiles, motors and industrial 

machinery. It is also found in smaller devices and home appliances, such as computers, televisions and both cell and standard phones.