Showing posts with label winding wire. Show all posts
Showing posts with label winding wire. Show all posts

2015/09/06

Kapton Magnet Wire

Zhengzhou LPIndustry Co., Ltd is a professional supplier of magnet wire. Our company can provide high quality Kapton magnet wire.
Our Kapton magnetwire adopts high-quality F46 Polyesterimide layer and finishs through high heat sintering.
Our Kapton magnet wire’s temperature can reach 290℃ and its voltage class can be 7200v.
Our Kapton magnet wire has good quality, good mechanical strength and excellent chemical resistance.
Our Kapton magnet wire can be used in serious environment of motors.
1, uses for aerospace and submersible motors.
2, uses for high voltage coils.
3, uses for wind turbines.
4, uses for micro-electronics.
5, uses for other fields.




2014/11/03

Comparison of copper and aluminum winding wire


1.A calculation for aluminium and copper wires.
Copper has lower resistance per unit volume, ie, a 1 cm diameter copper wire has less resistance than a 1 cm aluminum wire.

BUT, aluminum is much lighter than Cu for the same diameter. If you used an aluminum wire that weighs the same as the 1 cm diameter copper wire, it would have LOWER resistance. And that is

why aluminum is used in power transmission, and also in aircraft, where weight is important.
To do this you calculate density resistivity which is (resistivity x density). Here is a partial table:
Al 28.2e-9 Ω-m * 2700 kg/m³ = 76e-6 Ω-kg/m²
Cu 17.2e-9 Ω-m * 8960 kg/m³ = 154e-6 Ω-kg/m²
Ag 15.9e-9 Ω-m * 10500 kg/m³ = 167e-6 Ω-kg/m²
Au 22.14e-9 Ω-m * 19300 kg/m³ = 427e-6 Ω-kg/m²
Zn 68e-9 Ω-m * 7130 kg/m³ = 485-6 Ω-kg/m²
Fe 100e-9 Ω-m * 7870 kg/m³ = 787e-6 Ω-kg/m²

Note that Al is half that of Cu.

2.How to replace the aluminum winding wire to copper wire in one transformer?
Since aluminum wire is slightly more than copper you'll need to account for the change in voltage drop.
If you replace just one half of the transformer with copper wire you'll need a resistor in series (series resistors add to the resistance).
If you replace both sides with copper wiring then you will not need a resistor to account for the changes.
Or you can purchase a new transformer. And you should expect that with an equivalent rating,
a transformer with copper winding will cost more than a transformer with aluminum winding.