What is the difference of Enameled wire ,magnet wire and Insulation wire?

We all know the enameled wire and magnet wire are two kinds of insulated wires，both Played an insulation role.
If people do not very understand its natural Properties, they might be confused with the magnet wire and enameled wire, because there are main properties are insulated.

In fact the enameled wire, magnet wire and insulated wire is essentially different, they have a big difference with each others when they are used.
Our daily talk about the “insulation wire “are usually used in high frequency places, while the enameled wire is rarely used in this area.

Their different purpose mainly depending on the insulating layer of different materials. The insulation layer of the enamel wire is not very good for the high frequency function, but insulated layer of magnet wire is very good.
In the high frequency current environment, the high frequency current is transmitted through the conductor's appearance, but the low frequency current is the main transmission through the conductor cross section.. This also determines the main difference.

From this point of view, the conductor density of the insulation wire is less than enameled wire, The reason is that the insulation wire is mainly used in the high frequency environment, which is the appearance of the conductor.; While the enameled wire is used in the low frequency environment, the whole conductor cross section is basically.
This is only relevant to its environment, and from here we can see that the distinction is obvious and is not hard to distinguish.

Poster：Angelia.Dong
Email：lp14@cnlpzz.com
TEL：0086-371-55625861
Skype：zzlpchina

The enameled wire industry development well known analysis in china

The enameled wire industry development well known analysis in china

Enameled wire certainly is the conductor which is very high purity, the electrical conductivity cladding coating of insulating covering.
Such as: Conductor +Insulating attract = Non-self-adhesive dielectric material
Conductor +Insulating paint+Layer=self-adhesive dielectric material

1. Labeled by purpose, my own enameled wires compris:

General enameled (general line) is especially used for general motor enameled wire, electrical, instrumentation, transformers and further workplace, Such as Polyester enameled wire, modified polyester enameled wire, Heat Resistance enameled wire;
Mainly used by winding wire weather above 180 ℃ then environmental work motors, appliances,instruments, transformers and further workplace.
Like the polyester- imide enameled wire, enameled wire polyimide, cotton é 22; amine / polyamide-imide enameled wire.
2, Simply by conductor materials, enameled wire can be put into: copper, aluminum but in addition copper clad alloy wire.
3. Press the adhesive might be divided into:
Alcohol -------- line experiencing alcohol self-bonding wire (such when: Lock).
Hot lined wire---- Hot line the particular role of self-adhesive very hot wire (such as a result of: PEI).
Dual-use line -------- experiencing alcohol or existing wire self adhesive

As modern society progresses, the continuous expansion of industry, enameled wire has an extremely wide field people,
has end up being the electrical, electronics, devices, electronics, communications,
and transportation and further products supporting the first raw material crucial,especially at present, the rapid expansion of household appliances, benefits in electronic innovative developments,communications industry rise to that you apply enameled wire provides new space to modify the proportion of applications in several fields,will put forward expensive enameled, update scientific requirements, adjust the the mix of enameled wire.
Over and above joining the WTO, enameled wire industry will face competition from the domestic and forex markets,
to corporate leaders better yet adds a mantle of thinking, helping the pressure.

Enameled wire products are electrical, electronics, devices, communications, electronics but in addition information,
gadgets, power tools, automotive and further industries to deliver supporting basic cloth industry,
is assigned to a long distinct products, the downstream currency markets more. Mainly from the upstream industry enamel copper,
alloy, paint and more industries.

Enamelled Copper Winding Wire

Solderable Enamelled Copper Winding Wire

Solderable Polyurethane 155 Deg C Enamel to BS6811 3.9 / BS60317 PT 20 / IEC 317-20 / IEC 60317-20.
Usually a gold colour but could vary .(e.g. red / green etc)
IF YOU HAVE A SPECIAL COLOUR REQUIREMENT PLEASE CALL/ FOR BULK REEL SEE www.lp-industry.com.
IF YOU REQUIRE MORE THAN 1KG IN ONE CONTINUOUS LENGTH ORDER 1KG ON 1 REEL ITEM AND SPECIFY "ONE LENGTH" AT THE CHECKOUT.

Polyester Enamelled Copper Winding Wire

Non-solderable Polyester 200 Deg C Enamel to BS6811 3.3 / BS60317 PT13 / BS 4665 / IEC 317-13 / IEC 60317-13.
IF YOU REQUIRE MORE THAN 1KG IN ONE CONTINUOUS LENGTH ORDER 1KG ON 1 REEL ITEM AND SPECIFY "ONE LENGTH" AT THE CHECKOUT.
FOR BULK REEL SEE www.lp-indstry.com.

Solderable Self Bonding Enamelled Copper Wire
Solderable Polyurethane Enamel with a bonding layer 155 Deg C Enamel to BS6811 3.13 / BS60317 PT 35 / IEC 317-35 / IEC 60317-35WE HAVE MOST SIZES ON THE SHELF PLEASE CALL / EMAIL.
IF YOU REQUIRE MORE THAN 1KG IN ONE CONTINUOUS LENGTH ORDER 1KG ON 1 REEL ITEM AND SPECIFY "ONE LENGTH" AT THE CHECKOUT FOR BULK REELS SEE WWW.enameledwire.net

PVA / Poly Vinyl Acetal Enamelled Copper

We have many other sizes in stock call / email us.

Twin Twisted Enamelled Copper Wire

A pair of solderable enamelled copper wires of different colours twisted together.WE ALSO KEEP THESE ITEMS ON BULK REELS WE CAN MAKE TO ORDER.

Stranded Enamelled Copper

Bunched copper conductors each strand individually enamelled.
For HF applications.

Bonded Bifilar Wire

Twin solderable enamelled copper wire in different colours parallel bonded.

Rectangular Enamelled Copper

WE HAVE A LARGE RANGE OF SIZES IN STOCK WHICH ARE NOT LISTED PLEASE CALL FOR DETAILS 40kg DRUMS.

ML Enamelled Copper Wire

240 Deg C Enamel to BS6811 3.8 / BS60317 PT 7 / BS4663 / IEC 317-7 / IEC 60317-7 CALL WITH YOU EXACT REQUIREMENT AND WE WILL CHECK OUR STOCK.

La introducción del alambre de cobre esmaltado

Parte 1: La primera explica de alambre de cobre esmaltado.
Alambre de cobre esmaltado es alambre de cobre recubierto por una nuture color pintura aislante.
La pintura es mangas de caucho / plástico delgadas tanto que otros cables tienen, sin embargo, proporcionan casi la misma cantidad de aislamiento.
Alambre esmaltado se utiliza principalmente en la construcción de electroimanes, ya que permite más bucles que se empaquetan en unvolume.
It más pequeña se llama alambre de cobre esmaltado.

Parte 2: Los tipos de alambre de cobre esmaltado.
Alambre de cobre esmaltado tiene tres tipos:
1.Round alambre de cobre esmaltado: Diámetro: 0.019-4.0mm, clase térmica: 130.155.180.200.220.
2.Flat alambre de cobre esmaltado: Diámetro: a: 1-10mm, b: 3-16mm, clase térmica: 130.155.180.200.220.
3.Enameled aluminio cuadrado de alambre: Diámetro: una (b): 0.8-7.0mm, clase térmica: 180 200 220.
4.Ultra Bellas rectangular esmaltado alambre de cobre: Diámetro: a: 0.025-4.0mm, clase térmica: 200.220.
5.Ultra Fine Auto-adhesivo rectangular esmaltado alambre de cobre: Diámetro: a: 0.025-4.0mm, clase térmica: 130 155 180.

Parte3: El otro explican de alambre de cobre esmaltado.
Es el alambre de cobre con una capa de esmalte para aislarla.
Está destinado a ser utilizado en bobinas y transformadores, motores, ventiladores, generador, donde el alambre se enrolla con las espiras en contacto físico con cada uno other.
The aways de pintura es de poliéster-imida, poliéster, poliuretano, y así sucesivamente.
El esmalte impide que las espiras de cortocircuito entre sí.

Parte4: Las propiedades de esmaltado de alambre de cobre.
Alambre de cobre se emplea por todo el mundial en equipo eléctrico.
Alambre de cobre esmaltado, también llamado "alambre magneto," también se utiliza ampliamente.
La diferencia entre el alambre de cobre esmaltado y el alambre regular es en el aislamiento que rodea el alambre.
Alambre de cobre normal está aislado envolviéndolo en goma gruesa.
Alambre de cobre esmaltado está aislado mediante el recubrimiento con esmalte.
Se utiliza principalmente en tres tipos de aplicaciones.
Se utiliza, en transformadores de transformar un tipo de energía eléctrica en otros tipos.
Se utiliza en motores de transformar la energía eléctrica en energía mecánica.
También se utiliza en los generadores de transformar la energía mecánica en energía eléctrica.

Comparison of copper and aluminum winding wire

1.A calculation for aluminium and copper wires.
Copper has lower resistance per unit volume, ie, a 1 cm diameter copper wire has less resistance than a 1 cm aluminum wire.

BUT, aluminum is much lighter than Cu for the same diameter. If you used an aluminum wire that weighs the same as the 1 cm diameter copper wire, it would have LOWER resistance. And that is

why aluminum is used in power transmission, and also in aircraft, where weight is important.
To do this you calculate density resistivity which is (resistivity x density). Here is a partial table:
Al 28.2e-9 Ω-m * 2700 kg/m³ = 76e-6 Ω-kg/m²
Cu 17.2e-9 Ω-m * 8960 kg/m³ = 154e-6 Ω-kg/m²
Ag 15.9e-9 Ω-m * 10500 kg/m³ = 167e-6 Ω-kg/m²
Au 22.14e-9 Ω-m * 19300 kg/m³ = 427e-6 Ω-kg/m²
Zn 68e-9 Ω-m * 7130 kg/m³ = 485-6 Ω-kg/m²
Fe 100e-9 Ω-m * 7870 kg/m³ = 787e-6 Ω-kg/m²

Note that Al is half that of Cu.

2.How to replace the aluminum winding wire to copper wire in one transformer?
Since aluminum wire is slightly more than copper you'll need to account for the change in voltage drop.
If you replace just one half of the transformer with copper wire you'll need a resistor in series (series resistors add to the resistance).
If you replace both sides with copper wiring then you will not need a resistor to account for the changes.
Or you can purchase a new transformer. And you should expect that with an equivalent rating,
a transformer with copper winding will cost more than a transformer with aluminum winding.

alambre de aluminio esmaltado magneto

alambre de aluminio esmaltado magneto para las ventas,
Gurantee 100% calidad, precio bajo, libre de muestras para realizar la prueba! enviarme correo electrónico:lp14@cnlpzz.com;skype:zzlpchina;

1.Diámetro：ronda：0.2mm-8.0mm
2.clase térmica：130,155,180,200,220C
3.Precio:precio de fábrica, el 100% del precio bajo
4.alta calidad,proporcionar sampls para realizar la prueba, de forma gratuita.
enviarme correo electrónico:lp14@cnlpzz.com;skype:zzlpchina;whats app：8615838308831

How to solder enameled copper wire?

How to solder enameled copper wire?

1.Set out all your parts to solder. Why we do this? Because the soldering iron is extremely hot, don't lay it down while you are looking for the next part to solder. You can buy a soldering kit, which includes a soldering gun and base, sponge and solder. Or you may already have some components such as the soldering iron. Put on all protective gear.

2.Plug in the soldering iron. Place the soldering iron in the stand. The soldering iron will take a few minutes to heat up. Only heat it up when you are ready to go. This prevents accidental burns or fires. Get your sponge wet and then wring out the water. The idea is to have a damp sponge, not one soaking in water.

3.Check the manufacture's instructions for the appropriate wattage for your specific electronics project. Electronic components require a certain amount of heat. Too much heat can melt the part you're trying to solder. Soldering irons come in different wattage outputs, so check for proper wattage rating.

4.Apply the tip of the soldering iron to the wet sponge to make the tip clean. Cleanliness is a must for good solder joints. Hold the soldering iron to the part you are soldering. Think of holding a pen or pencil. Avoid any contact with the tip or heat shield; both can reach 400 degrees in temperature.

5.Hold the solder to the joint you are trying to solder. Place the tip of the solder at the point where the solder iron tip and part you are soldering meet. Hold the solder in place for a few seconds until solder starts to flow. Remove the soldering iron before you apply too much heat. Inspect your joint. The joint should look like a dome and be shiny. It not, then apply a bit more solder to build up the joint. Don't forget to clean your soldering iron often on the wet sponge.

ZHENGZHOU LP INDUSTRY CO.,LTD

Established in 1993, has developed a professional manufacturer of Magnet Wires in China.